Quick Guide for Downloading SW and IMEI презентация

Quick Guide for Downloading S/W and IMEI

Tool & Requirements 1. USB Cable 2. Support USB 2.0 with PC 3. Only support windows XP

Install USB Driver 1. Before downloading S/W and IMEI number, you must install USB Driver in the PC firstly. Enter Device Manager-> Other device, click the mouse on the right side, choose to update driver, then manually check and install driver software (See screenshot below). 在您的电脑进入面板控制，然后找到设备管理器，再找到其他设备，点击鼠标右键，选择更新驱动软件，会弹出一个对话框，选择手动查找并安装驱动程序软件。

2. After you choose “ manually check and install driver software”, click “Browser” then you must find a file named csdrivers in “ProductLineToolV8.00.14_20140703”, and click it and then click “OK”. 点击手动查找并安装驱动软件以后，会弹出一个对话框，然后选择浏览，在“ProductLineToolV8.00.14_20140703”这个文件夹，找到csdrivers这个驱动文件，点确定。 2. After you choose “ manually check and install driver software”, click “Browser” then you must find a file named csdrivers in “ProductLineToolV8.00.14_20140703”, and click it and then click “OK”. 点击手动查找并安装驱动软件以后，会弹出一个对话框，然后选择浏览，在“ProductLineToolV8.00.14_20140703”这个文件夹，找到csdrivers这个驱动文件，点确定。

Start to Download S/W 1. Open the file “ProductLineToolV8.00.14_20140703” 2. Click the program of “DownloadUSB_English”，please see the screenshot below:

3. Enter the interface and then click “Setup” as highlighted in Red color as below: 3. Enter the interface and then click “Setup” as highlighted in Red color as below:

4. Click “Download”. 4. Click “Download”.

5. Click “Browser” and find the s/w package from PC. For example, now I am trying to download S/W of B2410, and I put the S/W in “C:\users\rosalyn.yang\Desktop”, I will find the S/W there. 5. Click “Browser” and find the s/w package from PC. For example, now I am trying to download S/W of B2410, and I put the S/W in “C:\users\rosalyn.yang\Desktop”, I will find the S/W there.

6. After you find the S/W package in your PC, find a .lod file, then double click. 6. After you find the S/W package in your PC, find a .lod file, then double click.

7. Click OK. 7. Click OK.

Start to Write IMEI number 1. Open the file “ProductLineToolV8.00.14_20140703” 2. Click the program of “wimei_dup_english”，please see the screenshot below:

2. Enter IMEI interface and then click setup, you need to set up USB port, Flash type (Flash_spi32m) and SIM card number as highlighted in Red color as below, then click ok. 2. Enter IMEI interface and then click setup, you need to set up USB port, Flash type (Flash_spi32m) and SIM card number as highlighted in Red color as below, then click ok.

3. Input IMEI number in the blank highlighted in red color below. Power on the mobile phone, then connect it with PC by using a USB cable. When the phone shows up “Mass storage”, then press and hold 0 key. Then click “Start”. 3. Input IMEI number in the blank highlighted in red color below. Power on the mobile phone, then connect it with PC by using a USB cable. When the phone shows up “Mass storage”, then press and hold 0 key. Then click “Start”.