Chapter 20: Documenting the ATM Network Topology презентация

Chapter 20: Documenting the ATM Network TopologyObjectives
 Verify the ATM Switch Processor ILMI parameters
 Verify the Catalyst®Objectives (cont.)
 Start AtmDirector™
 Display the ATM network fabric
 Interpret theAtmDirector and ILMI
 Uses SNMP packet types over AAL5
 Adjacent nodesAToM MIB
 Physical interface MIB
 Per-VCC statistics MIB
 ATM-layer interface MIB
Verifying Parameters on the LS1010 ASP
 Required on at least oneConfiguring ILMI Parameters on the LS1010 ASP
 Enable ILMI
 Show ILMIConfiguring ILMI on the Catalyst ATM Module
 ILMI is enabled byEnabling VTP on the Catalyst ATM Module
 Disabled by default
 MustConfiguring the LECS and LES/BUSConfiguring a Backup LECSDiscovering the ATM NetworkDisplaying the ATM Network FabricInterpreting the ATM Topology MapDisplaying Details in the ATM Topology MapModifying the Topology Map PreferencesMerging and Separating ATM Fabrics
 AtmDirector automatically merges and separates fabricSummary
 Verify the ATM Switch Processor ILMI parameters
 Verify the CatalystSummary (cont.)
 Display the ATM network fabric
 Interpret the ATM topologyLab Diagram



Слайды и текст этой презентации
Слайд 1
Описание слайда:
Chapter 20: Documenting the ATM Network Topology


Слайд 2
Описание слайда:
Objectives Verify the ATM Switch Processor ILMI parameters Verify the Catalyst® ILMI parameters Enable VTP on the LANE module Discover the ATM network fabric

Слайд 3
Описание слайда:
Objectives (cont.) Start AtmDirector™ Display the ATM network fabric Interpret the ATM topology map Display device and link information Modify the ATM topology display

Слайд 4
Описание слайда:
AtmDirector and ILMI Uses SNMP packet types over AAL5 Adjacent nodes exchange autodiscovery information Automatically configures end-system addresses

Слайд 5
Описание слайда:
AToM MIB Physical interface MIB Per-VCC statistics MIB ATM-layer interface MIB ATM-layer statistics Virtual channel MIB

Слайд 6
Описание слайда:
Verifying Parameters on the LS1010 ASP Required on at least one ASP interface Used for network management

Слайд 7
Описание слайда:
Configuring ILMI Parameters on the LS1010 ASP Enable ILMI Show ILMI status Show ILMI configuration

Слайд 8
Описание слайда:
Configuring ILMI on the Catalyst ATM Module ILMI is enabled by default Well known VPI/VCIs are used for ILMI and signaling ILMI keepalive timers must be enabled at both ends of a link or not used at all

Слайд 9
Описание слайда:
Enabling VTP on the Catalyst ATM Module Disabled by default Must be done before discovery Forces the default VLAN to be added Default VLAN needed for management

Слайд 10
Описание слайда:
Configuring the LECS and LES/BUS

Слайд 11
Описание слайда:
Configuring a Backup LECS

Слайд 12
Описание слайда:
Discovering the ATM Network

Слайд 13
Описание слайда:
Displaying the ATM Network Fabric

Слайд 14
Описание слайда:
Interpreting the ATM Topology Map

Слайд 15
Описание слайда:
Displaying Details in the ATM Topology Map

Слайд 16
Описание слайда:
Modifying the Topology Map Preferences

Слайд 17
Описание слайда:
Merging and Separating ATM Fabrics AtmDirector automatically merges and separates fabric maps Merges concatenate names Separation appends -1 and -2 to original names Original map must be closed to delete it

Слайд 18
Описание слайда:
Summary Verify the ATM Switch Processor ILMI parameters Verify the Catalyst ILMI parameters Enable VTP on the LANE module Discover the ATM network fabric Start AtmDirector

Слайд 19
Описание слайда:
Summary (cont.) Display the ATM network fabric Interpret the ATM topology map Display device and link information Modify the ATM topology display

Слайд 20
Описание слайда:
Lab Diagram


Скачать презентацию на тему Chapter 20: Documenting the ATM Network Topology можно ниже:

Похожие презентации